Parameter recommendations for Hybrid Ultrasound Simulation in RoboticsUltrasound demo

Hello ImFusion team,

I am reproducing the RoboticsUltrasound demo. I used the Hybrid Ultrasound Simulation algorithm with the default parameters to generate the virtual ultrasound image, but the result does not look realistic (see attached screenshot).

My questions are:

  1. Are there any optimized parameter setsI can use to get a better simulation result?
  2. Is the coarse resolution of the Label map also a reason for the unrealistic result?

Any advice on how to improve the visual fidelity would be greatly appreciated.

Thank you!

Hi Liujing,

Yes, the coarse resolution of the label map is part of the issue, but you can play with the parameters to obtain better results.

Try using a higher signalFreq, a higher focusDepth (around 160mm). You can also reduce the noise with noiseSizeScale and of course, a higher rayCount and elevationRayCount will yield better results at the cost of speed. You should be able to change these in the GUI, but if you save the current workspace into a file, you can also edit them in it programmatically.

Additionally, you can change the physical parameters for each group if you have more accurate measurements from a real case study.

I would advise against changing the interpolation of the label map, as you need integer values for the simulation to work, but you can change the resampling (currently a 3x3x3 mm voxel is used) to something lower to get finner volumes and a better simulation.

Let me know if that improves it and we can keep looking otherwise,